The Keep the Heat™ (formerly Neu-Air) Air-To-Air Heat Exchanger
Is your facility in need of general ventilation? Do you have exhaust fans at the ceiling or upper walls wasting lots of energy? If you were frustrated with this winter’s heating bills, start planning now for saving energy next winter.
The main reason for installing fans or ventilation is to protect the employees from harmful fumes. No one should have to breathe contaminated air while in the workplace. All people just want to feel good mentally and physically. Giving your employees the opportunity to breathe some fresh air on a daily basis is crucial. In that respect this system is like no other. We will exhaust the bad air and save lots of heat in the process. This will allow wall fans to be turned off saving heat also. The welding smoke and diesel fumes, CO, mist and haze, tend to naturally rise to the ceiling and hang in the air. Do you agree? What we do is create the perfect air movement in the shop.
More About Keep the Heat™ Air-To-Air Heat Exchanger
Energy Savings!!! By utilizing efficient heat recovery. You actually recover and reuse the heat you’ve already paid for!
Ease of Operation. This is a no hassle system. You just turn it on and let it do its job. There are no tubes that the mechanic needs to move from one location to another. It’s simple but amazingly effective!
Low Maintenance and Operating Costs. There are very few moving parts, only two motors that have sealed bearings, and there are no expensive filters to change.
Efficient Exhaust of Contaminated Air. Helps maintain proper Oxygen levels in welding areas where gases such as argon and CO2 are present. The system also removes odors and humidity Without losing heat through existing exhaust fans.
Provides a Much Healthier Work Environment! While it takes out the contaminated air it is constantly supplying fresh outdoor air resulting in cleaner fresher air.
Extended Life of your Heating Equipment.. Heating equipment in an environment that is harsh will burn the particulates in the air creating alkalis or acids that eat away at your equipment’s heat exchanger shortening its life.
Fresh Air Delivery to employees at floor level.
Very little Building Construction Necessary The system only requires a wall opening that is 21 1/2″ by 22 1/2″ and does not require much structural support.
The system can also be used in the summer by exhausting excess heat at the ceiling, with an added summer benefit of bringing cool night air into your shop when the facility is closed.
Because fresh air is pumped in, the stagnant air is forced out. The Keep the Heat™ system removes stale stagnant air from problem areas all over your shop. Removing contaminants such as welding smoke, and diesel smoke, effectively ending smoke haze complaints. The system also removes dangerous Carbon Monoxide, odors, and humidity. The system also removes dust creating cleaner and fresher offices.
- Who uses this unit? …. Anybody that wants ventilation without losing heat.
- Machine Shops
- Welding Shops
- Construction Companies
- Truck Service Facilities
- Parks Departments
- Fire Departments
- County & State Garages
- Sheet-metal Shops
- Equipment Rental Stores
- Body Shops
- Equipment Manufacturers
- Auto Repair Facilities
Model: KTH-1 ELECTRICAL SPECS OPTIONS
|Intake Fan:||1 HP||208-230/460V 3PH||1725rpm||3.6-3.8/1.9amps|
|Exhaust Fan:||1 HP||208-230/460V 3PH||1725rpm||3.6-3.8/1.9amps|
|Intake Fan:||1 HP||115/230V 1PH||1725rpm||8.8/4.4amps|
|Exhaust Fan:||1 HP||115/230V 1PH||1725rpm||8.8/4.4amps|
Direct Drive/TEAO Motors
Controls: on-off switch required for each Fan
1- Intake switch
1- Exhaust switch
Magnetic starters needed on three phase applications
When using a VFD controller no starter is required The VFD has its own protection.